{"product_id":"drop-spreader-for-precise-application","title":"Drop Spreader for Precise Application","description":"\u003cp\u003eThis drop spreader uses an innovative setting dial to make changing the spreader setting quick and easy. It is built to last, simple to use and gives accurate applications of granular materials.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInnovative setting dial:\u003c\/strong\u003e makes adjusting the spreader setting straightforward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge stainless-steel hopper:\u003c\/strong\u003e sealed securely to stop leaks, so even the finest products, such as creeping bentgrass seed, stay contained.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty frame:\u003c\/strong\u003e a robust build that copes with regular use and harsh conditions for reliable, long-term service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic turf tyres:\u003c\/strong\u003e spread the weight evenly to avoid damaging the turf and move smoothly over different surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic extended handle:\u003c\/strong\u003e designed for comfort to reduce operator fatigue on longer jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen\/shut-off control:\u003c\/strong\u003e makes it easy to control the flow of material and work more efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear lift handles:\u003c\/strong\u003e allow safe, simple lifting for easier transport and handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable rain cover:\u003c\/strong\u003e keeps the product protected when applying in poor weather.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 year warranty:\u003c\/strong\u003e supplied with a three-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003cp\u003eFollow the steps below to get the best results from the spreader. Before the first use, and from time to time afterwards, check that the left and right sides of the spreader are aligned (see the calibration section).\u003c\/p\u003e\u003ch4\u003eStep 1. Check the spreader before use\u003c\/h4\u003e\u003cp\u003eInspect the spreader carefully to make sure it is clean and free from any debris left from an earlier job.\u003c\/p\u003e\u003ch4\u003eStep 2. Check the material\u003c\/h4\u003e\u003cp\u003eMake sure the product is in good condition, flows freely and is suitable for use in a precision drop spreader.\u003c\/p\u003e\u003ch4\u003eStep 3. Set the aperture\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eMove the on\/off lever to the closed position (towards the handle grips).\u003c\/li\u003e\n\u003cli\u003eUndo the centre thumb screw on the orange setting dial so the dial can turn.\u003c\/li\u003e\n\u003cli\u003eTurn the setting dial to the position needed for the required application rate, using the 1 to 25 scale.\u003c\/li\u003e\n\u003cli\u003eWhen the chosen number lines up with the arrow on the hopper, turn the thumb screw clockwise to lock the setting.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003eStep 4. Fill the hopper\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eKeep the control lever in the off\/closed position (towards the handle grips) while filling.\u003c\/li\u003e\n\u003cli\u003eFill the hopper evenly across its full width.\u003c\/li\u003e\n\u003cli\u003eAlways fill in a safe area, away from places where an accidental spill could cause damage.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003eStep 5. Spread the material\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003ePush the spreader at a brisk walking pace of about 5 km\/h.\u003c\/li\u003e\n\u003cli\u003eBefore treating the area, apply a single header strip at each end of the area.\u003c\/li\u003e\n\u003cli\u003ePush the on\/off lever forward to open the aperture as you begin walking forward.\u003c\/li\u003e\n\u003cli\u003eAt the end of each run, pull the on\/off lever back to the closed position to shut the aperture.\u003c\/li\u003e\n\u003cli\u003eMaterial is applied between the wheels, so passes must overlap. Overlap the wheel tracks on each return pass to prevent striping.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003eStep 6. Clean the spreader after use\u003c\/h4\u003e\u003cp\u003eAlways empty out any leftover product once the application is finished and dispose of surplus material properly.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTurn the spreader upside down to empty unused material from the hopper. Some extra work may be needed to clear any that remains.\u003c\/li\u003e\n\u003cli\u003eTurn the orange setting dial to the fully open setting (25). Lift the left wheel slightly and spin it to turn the agitator and push out any trapped product, then do the same with the right wheel to clear that side.\u003c\/li\u003e\n\u003cli\u003eWash the hopper thoroughly with clean water, paying particular attention to the area around the two agitator bars inside the hopper and the on\/off shutter bar.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eMake sure the hopper is completely dry before the spreader is used again.\u003c\/p\u003e\u003ch3\u003eCalibration\u003c\/h3\u003e\u003cp\u003eThe spreader is calibrated at the factory. It has two agitators that work independently, driven by the left and right wheels, which keep material flowing evenly through the hopper aperture.\u003c\/p\u003e\u003ch4\u003ePre-use alignment check\u003c\/h4\u003e\u003cp\u003eIt is recommended that you check the left and right sides of the spreader are aligned before first use and periodically afterwards.\u003c\/p\u003e\u003ch4\u003eCalibration key\u003c\/h4\u003e\u003cp\u003eA calibration key for checking alignment is supplied with the spreader.\u003c\/p\u003e\u003ch4\u003eHow to calibrate\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet the dial:\u003c\/strong\u003e set the dial to 13 and open the shutter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach the aperture holes:\u003c\/strong\u003e stand the spreader on its handles so the holes are easy to get to.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert the calibration key:\u003c\/strong\u003e count four holes in from either the left or right side and insert the key into the fourth hole. It should be a snug fit up and down. Repeat on the other side to check it is snug there too.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003eResetting the alignment\u003c\/h4\u003e\u003cp\u003eIf the shutter bar becomes misaligned and is not damaged, it can be reset. This is easiest with two people.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoosen the locking knob:\u003c\/strong\u003e undo the black locking knob in the centre of the orange setting dial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen the shutter bar:\u003c\/strong\u003e push the on\/off lever on the handle to the 'on' position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn the spreader over:\u003c\/strong\u003e place it upside down, ideally on a workbench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoosen the retaining bolts:\u003c\/strong\u003e undo the 10mm bolts on each side of the shutter bar. There are four in total, two on the left and two on the right.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert the calibration key:\u003c\/strong\u003e pull the shutter bar back with your left hand and insert the key into the fourth hole from the right-hand side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert A4 paper:\u003c\/strong\u003e fold a sheet of A4 paper in half and slide it between the shutter bar and the hopper to avoid overtightening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTighten the bolts:\u003c\/strong\u003e keep a hand pressed firmly on the shutter bar to apply slight downward pressure, then tighten the bolts while keeping the key snug in the hole. Check that the mounting plates are parallel, then tighten the lock nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the paper:\u003c\/strong\u003e take out the folded A4 sheet, then tighten the black knob on the orange setting dial, which should be set to position 13.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeat on the other side:\u003c\/strong\u003e insert the key into the fourth hole from the left-hand side and repeat steps 6 and 7 on that side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the fit:\u003c\/strong\u003e the key should now sit snugly up and down in every hole.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003eTroubleshooting\u003c\/h4\u003e\u003cp\u003eIf the holes are still out of line, the spreader may be damaged, and a new shutter bar, parts or even a complete hopper may be needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpread width:\u003c\/strong\u003e 0.84m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHopper capacity (grass seed):\u003c\/strong\u003e 13kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHopper capacity (granular fertiliser):\u003c\/strong\u003e 25kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication rate scale:\u003c\/strong\u003e 1 to 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHopper:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDrop spreader\u003c\/li\u003e\n\u003cli\u003eCalibration key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Turf Care Pro","offers":[{"title":"Default Title","offer_id":58855629095243,"sku":"TCP105","price":1908.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/0142\/3435\/files\/a13c1ed2a2a8a69af4192f8670f707bd.jpg?v=1792074931","url":"https:\/\/turfcarepro.co.uk\/products\/drop-spreader-for-precise-application","provider":"Turf Care Pro","version":"1.0","type":"link"}