Brushwood Killer 1L – 48g/l Triclopyr for Brambles, Nettles, Saplings & Tree Stumps (Treats 340m²)

A 1 litre brushwood killer containing 48g/l triclopyr that treats up to 340m². It controls brambles, thistles, nettles, dock, woody weeds and unwanted saplings, and can also be used to kill off persistent tree stumps. Because it kills weeds without harming grass, it is safe to use in turfed areas, and it is also ideal for treating neglected, non-crop areas.

Key Features

• Controls brambles, thistles, nettles, dock and other tough weeds
• Treats woody weeds, hardwood saplings and persistent tree stumps
• Kills weeds without harming grass, so it can be used in turfed areas
• Ideal for neglected, non-crop areas
• 1 litre pack treats up to 340m²
• Children and pets can go onto treated areas once the spray has dried

Product Overview

How to Use

Apply following the instructions on the pack, according to the weeds, saplings or stumps being treated. Leave at least six weeks between applications and before re-planting.

Where & When to Use

• Tough weeds and hardwood saplings: May - October
• Woody weeds: June - August
• Tree stumps: Autumn/Winter

Measuring the Dose

1. Shake well before use.
2. Keeping the bottle upright, loosen the cap and squeeze the bottle gently to fill the dose chamber to the level needed.
3. Take off the cap and empty the dose into the water in your watering can or sprayer, mixing thoroughly.
4. Repeat as required.

Application Rates

• Nettles, brambles and tough weeds: with a watering can fitted with a fine rose, mix 25ml in 5 litres of water and apply evenly over 8.5m² (10 sq yards); with a sprayer, mix 25ml in 1.25 litres of water and apply evenly over the same 8.5m² (10 sq yards). Set the sprayer nozzle to a coarse setting so no fine spray is produced that could drift onto neighbouring plants.
• Woody weeds and hardwood saplings: with a sprayer, mix 25ml in 1.25 litres of water and apply evenly, covering the leaves, branches and stems.
• Tree stumps: mix equal volumes of product and water, then paint or spray all surfaces of the cut stumps and the bark down to soil level.

Notes

• The colour can vary without affecting the product's performance in any way.
• Safety: keep off skin, wash off splashes immediately and do not breathe spray.