Handheld Aerosol Applicator

This handheld aerosol applicator is made in the UK from extremely tough glass filled nylon plastic. It is very lightweight and gives steady, accurate control on both vertical and horizontal surfaces, while its trigger action takes the strain out of holding down the aerosol nozzle compared with spraying by hand.

Key Features

• Made in the UK from glass filled nylon plastic
• Very light in weight
• Steady, precise control on vertical or horizontal surfaces
• Trigger action makes continuous pressing of the aerosol nozzle far easier
• Takes standard 750ml, 600ml and 500ml aerosols, plus most 400ml aerosols

How to Use

1. Check the can will fit: it must measure at least 16cm from the top nozzle seam to the bottom of the can.
2. Line the nozzle up with the front nozzle guide, then snap the can into the front and back clips.
3. Make sure the top seam of the can sits in front of the face of the front clip, not behind it.
4. When using a line marking aerosol with a directional nozzle, once it is secured, check that the nozzle spray direction indicator lies across the horizontal plane rather than the vertical plane.

Specifications

• Material: Glass filled nylon plastic
• Made in: UK
• Compatible aerosol sizes: standard 750ml, 600ml, 500ml and most 400ml
• Minimum can length: 16cm (top nozzle seam to bottom of can)
• Operation: trigger action